Images are representations only.

R-Series SSI Model RP & RH Magnetostrictive Linear Position Sensor

Brand: Temposonics an Amphenol Company
Does not ship to OH, United States
Temposonics R-Series EtherNet/IP sensors represent MTS Sensors development and product offering in networked position feedback. 

EtherNet/IP systems require only a single point of connection for both configuration and control, because EtherNet/IP supports both I/O (or implicit) messages those that typically contain time-critical control data and explicit messages those in which the data field carries both protocol information and instructions for service performance. 

And, as a producer-consumer network that supports multiple communication hierarchies and message prioritization, EtherNet/IP provides more efficient use of bandwidth than a device network based on a source-destination model. EtherNet/IP systems can be configured to operate either in a master/slave or distributed control architecture using peer-to-peer communication.
Features
  • Linear, absolute measurement
  • LEDs for sensor diagnostics
  • Non-contact sensing technology
  • Direct etherNet/IP interface, position & velocity
show more
Temposonics R-Series EtherNet/IP sensors represent MTS Sensors development and product offering in networked position feedback. 

EtherNet/IP systems require only a single point of connection for both configuration and control, because EtherNet/IP supports both I/O (or implicit) messages those that typically contain time-critical control data and explicit messages those in which the data field carries both protocol information and instructions for service performance. 

And, as a producer-consumer network that supports multiple communication hierarchies and message prioritization, EtherNet/IP provides more efficient use of bandwidth than a device network based on a source-destination model. EtherNet/IP systems can be configured to operate either in a master/slave or distributed control architecture using peer-to-peer communication.
Features
  • Linear, absolute measurement
  • LEDs for sensor diagnostics
  • Non-contact sensing technology
  • Direct etherNet/IP interface, position & velocity
Close

Specifications

Brand

Approvals & Certifications

  • CE
  • EMC Electromagnetic Emission: EN 61000-6-4, Electromagnetic Immunity: EN 61000-6-2
  • IEC 60068-2-27, 60068-2-6
  • UL (C,US) 61010-1

Approvals & Certifications

  • ISO 9001 (DQS)

Communication

  • Data Transmission Rate, Max.
  • EtherNet/IP

Current

  • Current Drain: 110 mA Typical

Display

  • Diagnostic LED Display

Electrical Connectors

  • Integral Connector
  • M8 4-Pin Male Connector
  • Two Female, M12 4-Pin

Electrical Protection

  • Overvoltage Protection: up to 36 Vdc
  • Polarity Protection: up to -30 Vdc

Enclosure, Body Material

  • Sensor Electronics (Profile & Rod Model): Aluminum

Environmental Protection

  • IP65 - Model RP
  • IP67 - Model RH

Flange Type

  • Flat Face (FF)
  • Raised Face (RF)

Humidity

  • 90 % Relative Humidity, Non-Condensing

Hysteresis

  • < 4 µm

Indication

  • Red/Green

Length

  • Stroke (Profile Style): 1 to 200” (25 to 5,080 mm)
  • Stroke (Rod Style): 1 to 300” (25 to 7,620 mm)

Linearity

  • < ± 0.01 % of Full Stroke (Min. ± 50 µm)

Materials of Construction

  • Sensor Extrusion: Aluminum - Model RP
  • Sensor Rod: AISI 304L Stainless Steel 1.4306 - Model RH

Metric Connection

  • Threaded Flange M18 x 1.5 - Modle RH

Mounting

  • Adjustable Mounting feet or T-slot Nut (M5 Threads) in Bottom Groove - Model RP
  • Magnetic Mounting

Mounting Position

  • Any Orientation

Operating Pressure

  • psi: 10,000 (kPa: 69,000, bar: 690) Peak - Model RH
  • psi: 5,000 (kPa: 35,000, bar: 350) Static - Model RH

Operating Temperature

  • -40° to 75° C (-40° to 167° F)

Operating Voltages

  • 24 Vdc (-15 / 20 %) Nominal

Repeatability

  • < ± 0.001 % of Full Stroke (Min. ± 2.5 µm)

Resolution

  • 1 to 1,000 µm Selectable

Seat / Seal Material

  • Seal: Fluoroelastomer

Shock

  • 100 G (Single Hit) / IEC 60068-2-27 (Survivability)

Temperature Coefficient

  • < 15 ppm/°C

Torque

  • Typical Mounting Torque: 45 Nm (398 In/Lbs) - Model RH

UNF/UNC Connection

  • 3/4”-16 UNF-3-A - Model RH

Vibration

  • 15 G (10 to 2,000 Hz) / IEC 60068-2-6

Voltage

  • Dielectric Withstand Voltage: 500 Vdc (DC Ground to Machine Ground)
Close

Applications

  • Continuous Operation in Harsh Industrial Conditions
  • For Accurate, Simultaneous Multi-Position & Velocity Measurements
  • High Pressure Applications
Close