Images are representations only.

R-Series Powerlink Linear Position Sensor

Brand: Temposonics an Amphenol Company
Does not ship to Virginia, United States
Temposonics position sensors fulfil the requirements of the Ethernet Powerlink Standardization Group (ESPG).

Ethernet Powerlink V2 is an open protocol based on the Ethernet-standard according to IEEE 802.3. It is an extension to the Ethernet protocol which allows real-time data communication.

Within the Ethernet Powerlink protocol a CANopen based communication protocol for user data is specified. Powerlink is the only Ethernet protocol that meets hard real-time requirements with a software-only concept. No special Powerlink hardware is needed.
Features
  • Absolute position information
  • Velocity
  • Status
show more
Temposonics position sensors fulfil the requirements of the Ethernet Powerlink Standardization Group (ESPG).

Ethernet Powerlink V2 is an open protocol based on the Ethernet-standard according to IEEE 802.3. It is an extension to the Ethernet protocol which allows real-time data communication.

Within the Ethernet Powerlink protocol a CANopen based communication protocol for user data is specified. Powerlink is the only Ethernet protocol that meets hard real-time requirements with a software-only concept. No special Powerlink hardware is needed.
Features
  • Absolute position information
  • Velocity
  • Status

Specifications

Approvals & Certifications

  • ISO 9001 (DQS)
  • CE
  • EMC: Electromagnetic Emission EN 61000-6-4, Electromagnetic Susceptibility EN 61000-6-2
  • IEC 6008-2-27, 6008-2-6
  • UL 61010-1

Communication

  • CANopen Based Communication Protocol
  • Ethernet Powerlink Standardization Group (ESPG), Powerlink V2 According to IEEE 802.3” Interface

Current

  • Current Drain: 110 mA Typical

Display

  • LED Diagnostic Display Beside Connector

Electrical Connectors

  • M8 4-Pin Female Connector
  • Two Male, M12 4-Pin

Electrical Protection

  • Overvoltage Protection up to 36 Vdc
  • Polarity Protection up to -30 Vdc

Enclosure, Body Material

  • Sensor Electronics (Profile & Rod Model): Aluminum

Environmental Protection

  • Ingress Protection (Profile): IP65
  • Ingress Protection (Rod): IP67

Humidity

  • Dew Point, Humidity: 90 % Relative Humidity, Non-Condensing

Hysteresis

  • < 4 µm

Length

  • Stroke (Profile): 0.98 to 196.9” (25 to 5,000 mm)
  • Stroke (Rod): 0.98 to 299.2” (25 to 7,600 mm)

Linearity

  • < ± 0.01 % of Full Scale (Min. ± 40 µm)

Materials of Construction

  • Rod with Flange: AISI 304 Stainless Steel 1.4301
  • Sensor Profile: Aluminum

Metric Connection

  • Threaded Flange: M18 x 1.5

Mounting

  • Profile: Moveable Mounting Clamp
  • Profile: T-Slot Nuts M5” Base Channel
  • Rod: Hex Nut M18

Mounting Position

  • Any Orientation

Operating Temperature

  • 0° to 70° C (32° to 158° F)

Operating Voltages

  • 24 Vdc (-15 / 20 %)

Power Supply

  • Ripple: < 0.28 Vpp

Repeatability

  • < ± 0.001 % of Full Scale (Min. ± 2.5 µm)

Resolution

  • Resolution - Displacement: up to 1 µm

Seat / Seal Material

  • Seal: Fluoroelastomer

Shock

  • 100 G (Single Shock), IEC 6008-2-27

Temperature Coefficient

  • < 15 ppm/°C

UNF/UNC Connection

  • Threaded Flange: 3/4”-16 UNF-3A

Update Time

  • 1 millisecond Up 2,400 mm Stroke Length
  • 2 milliseconds Up 4,800 mm Stroke Length
  • 4 milliseconds Up 7,600 mm Stroke Length

Vibration

  • 15 G (10 to 2,000 Hz), IEC 60068-2-6

Voltage

  • Dielectric Strength: 500 Vdc (DC Ground to Machine Ground)