MH-Series MB Analog Absolute, Non-Contact Position Sensor
Does not ship to VA, United States
Description
Temposonics sensors can be used in versatile mobile machines without any restriction and replace contact-based linear sensors like potentiometers.
Highly dynamic systems are controlled safely by means of Temposonics sensors, thus enhancing the productivity, availability and quality of the working process of the machine.
Insensitive to vibration, shocks, dust and weathering influences and electro-magnetic disturbances. MB Sensors are designed for threaded port assembly in hydraulic cylinders.
Specifications
Specifications
Approvals & Certifications
- EMC Radiated Emission CISPR 12/16
- ISO 9001, 14982 (Agricultural & Forestry Machines), Radiated Ommunity: 11452-2 (Antenna), 11452-5 (Stripline), 7637-1 (Electric Disturbance on Vehicles), TR 10665 E.S.D
Electrical Connectors
- 4-Pin M12 Connector
Electrical Protection
- Overvoltage Protection: up to 30 Vdc (Ground-Vdc)
- Polarity Protection: (Vdc - GND)
Enclosure, Body Material
- Electronics: AISI 303 Stainless Steel 1.4305
Environmental Protection
- M12 Connector DIN 40050 Part 9: IP69K in Connected State
Hysteresis
- ± 0.1 mm
Linearity
- ± 0.15 mm
Materials of Construction
- Sensor Rod: 304L Stainless Steel (Ø 8 mm) 1.4306
Measuring Range
- 2.8 to 9.8” (72 to 250 mm)
Metric Connection
- M18 x 1.5 Male
Mounting Position
- Any Orientation
O-Ring Material
- NBR
Operating Pressure
- psi: 4,714 (kPa: 32,500, bar: 325) - Max.
- Ø 8 mm Sensor Rod - psi: 3,626 (kPa: 25,000, bar: 250) Nominal
Operating Temperature
- -40° to 105° C (-40° to 221° F)
Output
- 0.5 - 4.5 Vdc
Power
- Power Drain: < 1 W
Process Temperature
- -30° to 85° C (-22° to 185° F)
Shock
- IEC 60068-2-27 50 G, 11 milliseconds Single Hit, at 1,000 Shocks Per Axis
Storage Temperature
- -25° to 65° C (-13° to 149° F)
- Electronics: -40° to 105° C (-40° to 221° F)
Supply Voltage
- 12 Vdc (Tolerance Range 9-15 Vdc)
Tolerance
- Setpoint Tolerance: ± 1 mm
Vibration
- IEC 60068-2-64 15 G (10 to 2,000 Hz) Sinus