Series LTC2 Tilt Switch Control Unit
Does not ship to VA, United States
Description
The Series LTC2 Tilt Probe Control Units feature an adjustable time delay and a logic selector switch.
The logic selector switch determines when the output relay actuates and de-actuates, thus while in position one, the relay is energized when the probe is in the vertical position and de-energizes when the probe is in the titled position, and while in position two, the actions are opposite.
In addition, an adjustable time-delay feature may be assigned to either the vertical or the tilt position to prevent false signals.
The relay assumes the de-energized position upon reaching the end of the delay period as well as upon failure of power to the controller.
Features- Adjustable time delay feature may be assigned to either the vertical or the tilt position to prevent false signals
- Logic selector switch determines when the output relay actuates and de actuates, thus while in position one, the relay is energized when the probe is in the vertical position and de-energizes when the probe is in the titled position, and while in position two, the actions are opposite
- Relay assumes the de-energized position upon reaching the end of the delay period as well as upon failure of power to the controller
Specifications
Specifications
Conduit Connection
- 3/4” NPT
Consumption
- 10 W
Electrical Connectors
- 120 Vac
- 240 Vac
Electrical Rating
- 5 A at 120 Vac
- 5 A at 240 Vac
Enclosure, Body Material
- Cast Aluminum
Environmental Protection
- NEMA 4
- NEMA 4X
Indication
- Green LED Lamps (When Relay is Energized & Probe Vertical)
- Red LED Lamps (When Relay is De-Energized & Probe Tilted)
Operating Time
- 0.1 to 35 seconds
Power Requirement
- 115 Vac at 50/60 Hz
Switch Type
- DPDT
Temperature Range
- -20° to 40° C (-4° to 104° F)