Images are representations only.

Series MP Mini-Photohelic Differential Pressure Switch/Gauge

Brand: Dwyer Instruments, LLC
Does not ship to OH, United States
The Series MP Mini-Photohelic® differential pressure switch/gauge combines the time proven Minihelic® II differential pressure gauge with two SPDT switching set points.

The Mini-Photohelic® switch/gauge is designed to measure and control positive, negative, or differential pressures consisting of non-combustible and non-corrosive gases. 

Gauge reading is independent of switch operation. Switching status is visible by LED indicators located on the front and rear of the gauge.

Set points are adjusted with push buttons on back of unit.
Features
  • Gauge reading unaffected by switch operation and will continue to read pressure even during power loss
  • Visible switch status LED provides indication of set point switching state
  • Compact design but with the power of larger devices can meet the same application
The Series MP Mini-Photohelic® differential pressure switch/gauge combines the time proven Minihelic® II differential pressure gauge with two SPDT switching set points.

The Mini-Photohelic® switch/gauge is designed to measure and control positive, negative, or differential pressures consisting of non-combustible and non-corrosive gases. 

Gauge reading is independent of switch operation. Switching status is visible by LED indicators located on the front and rear of the gauge.

Set points are adjusted with push buttons on back of unit.
Features
  • Gauge reading unaffected by switch operation and will continue to read pressure even during power loss
  • Visible switch status LED provides indication of set point switching state
  • Compact design but with the power of larger devices can meet the same application
Close
Close

Specifications

Brand

Accessories

  • Mounting Screws

Accuracy

  • ± 5 % of Full Scale at 21.1° C (70° F)

Adjustment Type

  • Push Buttons

Approvals & Certifications

  • CE
  • cULus

Electrical Connectors

  • Accepts 22-12 AWG Wire

Electrical Rating

  • 5 A at 120/240 Vac Resistive
  • 5 A at 30 Vdc

Media

  • Air
  • Non-Combustible, Compatible Gases

NPT Connection

  • 1/8” NPT Female

Power Requirement

  • 24 Vdc / 24 Vac
  • 50/60 Hz 4 Watts

Sensor Orientation

  • Gage Face in Vertical Position

Set Point - Decreasing

  • Inches WC: 0 to 20
  • kPa: 0 to 3
  • Pa: 0 to 500

Set Point - Increasing

  • Inches WC: 0 to 20
  • kPa: 0 to 3
  • Pa: 0 to 500

Size

  • Gauge: 4-1/8” (104.78 mm) Depth x 3-1/16˝ (77.79 mm) Diameter

Switch Type

  • SPDT Relays (2)

System Pressure

  • bar: 2.07
  • kPa: 200
  • psig: 30

Temperature Range

  • -6.7° to 48.9° C (20° to 120° F)

Tube Connection

  • Barbed for 3/16” I.D. Tubing (STD)
Close

Applications

  • Fume Hoods
  • Dust Collection
  • Pneumatic Conveying
  • Clean Room
Close