Images are representations only.

Flushing Rings

Brand: Siemens AG
Does not ship to United States
Flushing rings are required for flange-mounted and pancake type remote seals, Article No. 7MF4800 ... 7MF4823, if the danger exists that the process conditions and the geometry of the connection could cause the process to form deposits or blockages.

The flushing ring is clamped between the process flange and the remote seal.

Deposits can be flushed away from the diaphragm through the holes in the side, or the pressure volume can be vented.

Different nominal diameters and forms permit adaptation to the respective process flange.
show more
Flushing rings are required for flange-mounted and pancake type remote seals, Article No. 7MF4800 ... 7MF4823, if the danger exists that the process conditions and the geometry of the connection could cause the process to form deposits or blockages.

The flushing ring is clamped between the process flange and the remote seal.

Deposits can be flushed away from the diaphragm through the holes in the side, or the pressure volume can be vented.

Different nominal diameters and forms permit adaptation to the respective process flange.

Specifications

Brand

Nominal Diameter

  • 2 inch
  • 3 inch
  • 4 inch
  • 5 inch
  • Other Version

Nominal Pressure

  • Class 150 ... 600
  • Other Version

ASME B16.5

  • RF 125 ... 250 AA
  • RFSF
  • RJT ring groove

Flushing Holes

  • Female Thread G1/4
  • Female Thread G1/2
  • Female Thread 1/4-18 NPT
  • Female Thread 1/2-14 NPT

Material

  • 316L Stainless Steel
  • Other Version

Certification

  • Acceptance test certificate B to EN 10204, section 3.1.B