Images are representations only.

Series GFC Gas Mass Flow Controller

Brand: Dwyer Instruments, LLC
Request Information
Does not ship to Ohio, United States
The Series GFC Gas Mass Flow Controllers combines a straight tube sensor with a restrictor flow element.

It is available for flow ranges up to 1,000 L/min and offered in aluminum or 316 SS in 1/4", 3/8", 1/2" and 3/4" sizes.
Features
  • Provides High Accuracy and Repeatability
  • Flow rates are virtually unaffected by temperature and pressure variations
  • Utilizes an electromagnetic valve and PID electronics to maintain continuous control by comparing measured sensor signal set to flow rates
  • Set points can be adjusted with local potentiometers or remotely via 0 to 5 Vdc or 4 to 20 mA Analog signal
  • Actual gas flow is displayed in engineering units on a 3-1/2 digit, 90° tiltable LCD readout
  • Can be used with Series GFT2 Flow Totalizer for applications requiring totalization
  • NIST Traceable Certificate Included
show more
The Series GFC Gas Mass Flow Controllers combines a straight tube sensor with a restrictor flow element.

It is available for flow ranges up to 1,000 L/min and offered in aluminum or 316 SS in 1/4", 3/8", 1/2" and 3/4" sizes.
Features
  • Provides High Accuracy and Repeatability
  • Flow rates are virtually unaffected by temperature and pressure variations
  • Utilizes an electromagnetic valve and PID electronics to maintain continuous control by comparing measured sensor signal set to flow rates
  • Set points can be adjusted with local potentiometers or remotely via 0 to 5 Vdc or 4 to 20 mA Analog signal
  • Actual gas flow is displayed in engineering units on a 3-1/2 digit, 90° tiltable LCD readout
  • Can be used with Series GFT2 Flow Totalizer for applications requiring totalization
  • NIST Traceable Certificate Included
Close
Close

Specifications

Brand

Accuracy

  • ± 1 % of Full Scale
  • ± 1.5 % of Full Scale

Approvals & Certifications

  • CE

Display

  • 3´ Extension Cable for LCD Readout
  • 3-1/2-Digits

Filter

  • 5 microns

Flow Rate

  • 0 to 1,000 L/minute
  • 0 to 1,000 mL/m

Media

  • Clean Gases Compatible with Wetted Parts

O-Ring Material

  • 316 Stainless Steel
  • Fluoroelastomer

Output

  • 0-5 Vdc
  • 4-20 mA

Power Requirement

  • ± 12 Vdc

Pressure Range

  • psig: 500 to 1,000 (kPa: 3,447 to 6,895, bar: 34.5 to 68.9)

Repeatability

  • ± 0.25 % of Full Scale

Response Time

  • 2 seconds to within ± 2 % of Actual Flow

Supply Voltage

  • 110 V
  • 110 Vac
  • 220 V
  • 220 Vac

Temperature Range

  • 0° to 50° C (32° to 122° F)

Tube Connection

  • 1/2” Compression Fitting
  • 1/4” Compression Fitting
  • 3/8” Compression Fitting

Wetted Materials

  • Aluminum - Anodized
  • Brass
Close

Typical Applications

  • Gas Flow Measurement
  • Gas Flow Control
  • Operating Pumps and Valves
  • Process Equipment
  • Vacuum Processes
  • Glass and Metal Coating
  • Film Depostition
Close